High end glass speaker in co-operation with Perfect 8

Glass Speaker CUBE S

Designed by Kolja Willimzik

  • RAL 9005Jetblack (RAL 9005)
  • RAL 7016Antracite Grey (RAL 7016)
  • RAL 7023Concrete Grey (RAL 7023)
  • RAL 9007Grey Aluminum (RAL 9007)
  • RAL 7040Window Grey (RAL 7040)
  • RAL 3003Ruby Red (RAL 3003)
  • RAL 2004Pure Orange (RAL 2004)
  • RAL 1004Golden Yellow (RAL 1004)
  • RAL 1013Pearl White (RAL 1013)
  • RAL 9010Pure White (RAL 9010)
×
You are looking for a different size or other changes? Customise your product here:
Glass Speaker CUBE S

Note: Please choose your product in the configurator first and then describe your customized product with as many details as you can.

Product Details

WHEN THE SO FAR BEST IS NOT GOOD ENOUGH FOR YOU...

As a longtime specialist for glass design we have joined efforts with international audio experts and proudly present a glass speaker system which is not only a visual highlight but plays at the top of the high-end audio league. 

By employing a specially developed holistic concept that is sonically optimized in every possible way, glass has become the ideal structural material for this revolutionary high end audio solution. Sound and appearance unite to a unique symbiosis that redefines the state of the art – not only when it comes to design. 

 

 
Highlights :

The unique sound and design experience

Unique glass enclosure structure free of vibrations and cavity resonances in the air volume throughout the bandwidth of the bass-/midrange driver; results in unparalleled purity and precision of sound. 

No transfer of vibrations to the surface below the speaker due to opposing force-coupled bass-/midrange drivers decoupled from the enclosure. 

Extremely low mechanical losses for clear, precise and dynamic bass response due to absence of enclosure damping material and vibrating surfaces. 

No baffle step (responsible for the typical box speaker sound in room) throughout the critical midrange due to omnidirectional radiation pattern up to 900Hz. 

Crossover frequency in the psychoacoustic optimal range (transition from interaural time difference to interaural frequency dependent level difference for localization by the auditory system). 

Ideal closed box avoiding the air flow noise and resonances associated with vented enclosures. The shallow roll off (12db/octave) results in low group delay where it is of greatest importance and cooperates with typical room acoustics in the best way (“room gain”). 

Flat front baffle without the typical cavities created by cone drivers minimizes the diffraction issues of conventional box speakers on the radiation of the tweeter. 

Very smooth frequency response even in the vertical dimension due to side mounted bass-/midrange drivers (uncolored floor and ceiling reflections).

 

Facts

Frequency response 
Below 30Hz in room (depending on room properties and positioning of speakers and listener, -6dB @ 50Hz anechoic 4pi, 12dB/octave roll off) to 25kHz (-5dB)

Typical THD 
Below 0.3% @ 96dB throughout critical midrange and treble 

Radiation pattern 
True 4pi monopole point source below 700Hz, 2pi point source above 1,2kHz, traversing in-between 

Treble (1 per channel)
(Extremely wide bandwidth, ultra-high quality tweeter with coated 35mm fabric dome. Top plate and T-yoke of the strong Neodymium magnet system are CNC machined for lowest distortion and excellent precision. Pole piece and voice coil former are ventilated into a rear chamber made of rigid metal in order to prevent cavity resonance and noise. 

Bass -/ Midrange (2 per channel) 
Specially developed proprietary 7“ Aluminum-Cone driver with low inductance linear magnetic drive due to heavy copper rings below and above the pole piece, extremely low mechanical losses, non-conductive voice coil former. Resonances and energy storage way outside passband. Very long stroke design (linear 14mm p-p, max. 22mm p-p) 

Impedance 
4 Ohm 

Sensitivity 
86dB 2.83V @ 1m (anechoic 4pi). Maximum dynamic output SPL approx. 112dB.

Power handling 
100W, short term 250W, 1000W impulse 

Crossover 
High quality Mundorf foil capacitors and air core coils in separate chamber, isolated from structural vibrations and the air pressure inside the enclosure. 

Dimensions 
Approx. 25cm x 27cm x 37cm (w x d x h) 

Weight 
Approx. 21 kg 

 

Delivery

For the countries Germany, Belgium, Liechtenstein, Luxembourg, Netherlands, Austria and Switzerland applies:
Free delivery directly to the point of use, e.g. your living room, bedroom or office. In addition, we will unpack your new designer furniture from DREIECK DESIGN directly, take care of any assembly work and dispose of the packaging. This service is carried out by our trained delivery team or one of our premium partners. Of course we will contact you in advance to make an appointment.

For the delivery conditions to other countries, please look here.

Designer

For the best and fastest browsing experience, please use one of the browsers of the latest generation: Edge, Chrome, Firefox, Safari. You may encounter browsing and functionality errors if you use the older generation browsers.